5
Attach top bracket and use washer and wing
nut to loosely attach bracket to gooseneck.
Position bracket as shown.
Position the front of the nozzle so that
the slot is parallel to brush as shown and
insert into bracket.
Position the rear of the nozzle as shown. The
main body of the nozzle should be about
1/16
th
of an inch out from the bracket. If it is
too close you will not be able to connect the
hose properly. Tighten wing nut to clamp
nozzle.
Connecting the Hose
Connect the male end of the hose to the unit.
Connect female end of hose to nozzle and
attach hose to pole as shown.
1/16
th
inch
from
bracket
Attach hose
to pole
Nozzle
slot
should be
parallel to
brush
