6
IMPORTANT INSTRUCTIONS
IMPORTANT INSTRUCTIONS
IMPORTANT INSTRUCTIONS
IMPORTANT INSTRUCTIONS
•
Before use, the equipment must be correctly assembled with all of its components
•
Check that the electrical outlet is correct for use with the plug on the machine
•
Before connecting, check that the specified motor voltage corresponds to the main
voltage available
•
Never use the equipment near flammable, explosive or toxic substances: sparks from
the motor could cause dangerous reactions.
•
Always unplug the machine from the electrical outlet when leaving machine unattend-
ed or before attempting any repair.
•
Service and repair should be done by qualified personnel only. Use only original
manufacturer’s replacement parts.
Operation
Operation
Operation
Operation
This machine is a commercial vacuum designed for wet or dry pick up. And must be stored
This machine is a commercial vacuum designed for wet or dry pick up. And must be stored
This machine is a commercial vacuum designed for wet or dry pick up. And must be stored
This machine is a commercial vacuum designed for wet or dry pick up. And must be stored
in a dry location.
in a dry location.
in a dry location.
in a dry location.
•
Machines with dual or triple vac motors can be run together or independently as the
job requires.
•
Dry soil can be vacuumed directly into the tank or into a disposable paper bag fitted
onto the vacuum inlet.
•
For wet pick-up, remove polyester filter. The machine is equipped with a shut-off float.
As the tank is filled to capacity, a float rises and seals the vac intake, causing a loss of
vacuum. Switch off the vacuum when this happens and bring the machine to a drain.
•
To empty the machine, either use the drain hose mounted on the back of the tank, or
remove the motor head assembly and tilt the tank backwards on tipping models, or lift
and dump out the contents of smaller units.
•
With both wet and dry applications be sure to frequently clean the filter. This is
especially true when the vacuum is being used with strippers and floor finish.
After Use
After Use
After Use
After Use
1
.
Store the cord on the hook.
2. Store the appliance indoors, away from sources of heat.
3. This appliance is provided with an automatically reset
thermal limiter to avoid damage to motor. If thermal limiter
operates do one or more of the following:
•
Change the bag
•
Clean or replace the cartridge filter
•
Check hose and tank inlet for any obstructions
•
Wait a few minutes for the thermal limiter to re-close the circuit