3 .IR learning
4
1) On iPazzPort keyboard,hold down the button “ ” seconds, until the second light flash to solid.
2) Put together your keyboard remote and the source IR remote, head to head, approximately 1 inch apart.
3) Press the button on keyboard "+" for example, and the LED will start blinking and be steady on, then press
the button V+ on your source IR remote.
4)The LED on the keyboard will blink 3 times quickly, indicating a successful learning
5) While LED is on solid, repeat steps 3) & 4) to program other target buttons.
6) When the learning process is all completed, just wait for its auto setting process approximately 10 seconds
till the LED goes off.
7) It is ready to use, now.
Note: Please wait for 3 seconds before programming the next button.
1
The detailed steps are printed
on the battery cover
.
Power/Source/-/
Channel up/down /
Other two free buttons
Note:
1.Only work for the TV Remote which support IR learning feature;
2.All the 8 buttons could program with each tv remote key,the mark
is to remind the common feature.
Steps:
