the following are some common problem and useful tips . You can
also email us or leave messages on our social platform by searching
ipazzaportfans on facebook, twitter, YouTube,
4.1
No response on the keyboard
(The USB receiver has be paired with the keyboard in factory ) it is
much easy to connect it with other device through USB (plug and play )
and you don't have to pair it next time for its auto memory function.
Please follow the steps below if you fail to connect it with other device
(1) to make sure the USB receiver is not loose in the USB port
(2) to make sure the keyboard is not in low power capacity
(3) to make sure the keyboard is powered on
(4) to make sure the PC is not too old-fashioned to recognize the USB
Useful tips:
(1) pull out and plug the USB receiver into the USB port and wait for
a few seconds(It will take the PC some seconds to recognize the
USB receive
(2) If one of the indicators blinks even without any operation on the
keyboard ,the keyboard is in low power capacity .Please replace
the batteries timely
(3) please switch the power button to the position “on” ( a blue light
will blink several times and then go off)
(4) to check out if the system requirement of the keyboard is
compatible with the PC
Attention :
Please turn to the last resort if all the tips above fail (Your PC has
recognized the USB receiver but still no response on the screen after
you power on the keyboard and slide on the touchpad, which means
the USB doesn’t pair with the keyboard in advance.) : pull out and
plug in the receiver in the PC USB port and press ‘Fn+F1” as soon as
you can. When the indicator goes off, the keyboard will recognize the
USB successfully.
4 Troubleshooting:
6
