7
Lens Position
Both cameras -‐ the front lens and the rear lens of the IP Dashcam rotate 180°. You can
move the lens your preferred position to get the best video shooting angle in your vehicle.
Manual On/Off
Manually turn on: Press and hold the power button down and the red start-‐up
indicator will turn and the dashcam will start recording video and the blue indicator light
will be flashing. Press the power button again to switch it off.
Auto On/Off
Connect the IP Dashcam to the car charger power source. The dashcam will automatically
start up and begin to record video shortly after you start the vehicle. It will automatically
shut off once you shut down your vehicle.
Note:
When the power is low, the IP Dashcam will save the current video and automatically
switch off after sending a signal to notify you.
Reset Button
If the IP Dashcam freezes or is not working correctly, press the reset button and re-‐start
the dashcam, it will fix the problem
.
Mode Button
There are two modes for the IP Dashcam – Video and Playback Mode. You can switch
between the two by pressing the MODE button. In video mode, press the OK button to
start/stop recording video. In playback mode, the video files will be organized by time
sequence, which can be accessed pressing the UP/DOWN buttons. Press the OK button to
play the selected video file.
