IP-COM W185AP Скачать руководство пользователя

Страница: 62 / 63

Safety and Emission Statement

CE Mark Warning

Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

This is a Class B product. In a domestic environment, this product may cause radio interference, in which case

the user may be required to take adequate measures.

NOTE:

(1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized

modifications to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a

shielded RJ45 cable.

FCC Statement

This device is restricted to be used in the indoor.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one of the

following measures:

—

Reorient or relocate the receiving antenna.

—

Increase the separation between the equipment and receiver.

Содержание W185AP
































































Результаты поиска

Содержание W185AP

Отзывы:

Похожие инструкции для W185AP

Бренды по названию

Популярные бренды

IP-COM W185AP, Руководство пользователя

Результаты поиска

Содержание W185AP

Отзывы:

Похожие инструкции для W185AP

Бренды по названию

Популярные бренды