IP-COM AP255_US, Руководство пользователя

Страница: 32 / 55

Web UI functions
-
27
-
4.4.5 Access control
On this page, you can set up rules to forbid or permit specified wireless clients to connect to this device. The rules
are based on MAC address.
Parameter descriptions
Parameter Description
SSID Select a SSID to perform this function.
Filter Mode

Disable: Disable access control function.

Allow: The device permits wireless users that correspond to the added MAC addresses to
connect to the device. Other users are not allowed to connect.

Deny: The device forbids wireless users that correspond to the added MAC addresses to
connect to the device. Other users are allowed to connect.
MAC Address
Manually enter MAC addresses of wireless users that are forbidden or permitted to connect
to the device.
To make a MAC address effective to be forbidden or permitted, click this button to add the
entered MAC address to the following list.
Configure access control function
There are three commonly used situations:

When you want to forbid or permit some wireless users that are not connected to the device

When you want to forbid or permit some wireless users that are connected to the device

If you want to delete a wireless user from the access control rule

When you want to forbid or permit some wireless users that are not connected to the device, do as follows:
1. Log in to the device’s web UI.
2. Go to Wireless > Access Control .
3. Set up the access control rule.
1) SSID: Select a SSID to perform this function.
2) MAC Filter Mode: Select an option. For example, if you want to forbid certain wireless users to connect
to this device, please select
Deny .
3) MAC Address: In the second table, enter a MAC address that is forbidden or permitted to connect, such
as AA:AA:AA:AA:AA:AA.
4) Click Add . The MAC address goes into the following list.