8/42
B. Hardware
Installation
B-1: Hardware Connection
i.
Connect power adaptor
ii.
Connect Video Server to PC or network with Ethernet cable
iii.
Set up the network configurations according to the network environment.
For further explanation, please refer to chapter VI, “Network
Configuration for Video Server”.
B-2: I/O Control Instruction
I/O terminal connector – used in application, for e.g., motion detection, event
triggering, alarm notifications. It provides the interface to:
Digital Input (GND+Alarm) – An alarm input for connecting devices that can toggle
between an open and closed circuit, for example: PIRs, door/window contacts, glass
break detectors, etc. When a signal is received the state changes and the input becomes
active.
Relay output (COM +N.O.) – An output to Relay switch, for example: LEDs, Sirens,
etc
