IP Camera CL-15BMX, Руководство пользователя

Страница: 67 / 74

67
and then camera will execute the action user has set, for example, send
snapshot to E-mail address.
I/O PIN definition c.
GND (Ground): Initial state is LOW •
DO (Digital Output): DC 5V •
DI (Digital Input): Max. 50mA, DC 5V •
I/O Setup 2.
Click I/O Setting from the system setup page via IE, and check “Out1” to a.
enable I/O signal.
Output Test b.
After the external input and output hardware is installed, you can use the
"Relay Out" bottom on the live video page to test if DO / Relay Out works.
OnOff Switch mode: (i)
Click "ON", the camera will trigger the external output devise. For
example, your alarm buzzer will continuously ring. You can manually
break off the output signal by clicking "OFF".