IO-FLASHER basic version: -
In IO-FLASHER basic version you have three LED to indicate
the status on programmer
GREEN LED: - Indicates that programmer is ready to program next
chip.
RED LED – Indicate that there is any error during programming.
Press button again to clear the error state of programmer.
BLUE LED: - Indicates (while blinking) that IO-FLASHER is
programming the chip and busy right now. Please do not press the
button again if this LED is Blinking.
If you are getting RED LED indication again and again than use IO-FLASER GUI in
monitoring mode to check the error code and its meaning. (Not available IO-Flasher GUI
V2.0)
IO-FLASER PRO: -
In IO-FLASER PRO you have LCD which display all indication, error code
and its meaning during programming. Below are many screens showing useful information
Figure 22
Figure 23(a)
Figure 23(b)
Figure 23(c)
Figure 23(a)
Figure 21(e)
Figure 21(f)
Figure 21(g)
