IOTRONIC 7121, Руководство пользователя, Страница: 59 / 68

User manual
59
ENGLISH
Digital Satellite R
eceiver
By pressing the OK button on each of the options “DiSEqC 1.2” or “USALS”
of the “Positioner” option in the “Antenna Setup” menu, you access the
option range for dish positioning in each case.
DiSEqC 1.2
This menu enables you to vary the orientation of the mobile aerial to select
orbital positions of new satellites or correct the positions of existing satellites
that have already been memorized.
- Satellite
We have to define the satellites we are going to use. For this purpose we
can use the V+/V- buttons, or press OK to activate the popup menu.
- TP Index
Specify a transponder to act on, using the V+/V- buttons.
- Position Nr. & Save
Each satellite will have a different position number. There are 60 posi-
tions available. Allocate a position number to the satellite that has been
defined.
- DiSEqC Mode
Select a DiSEqC mode from among “User”, “Go to X”, “Installer” and
“Advance” modes.
- Movement
This will move the aerial East or West, using the V+/V- buttons. Each
click on the button moves the aerial one step. If you keep your finger on
the button, the movement will be constant.
- Limit setup (Advance mode)
The limit points are those which indicate the maximum rotation of the
aerial at both ends of the arc. There is an Eastern and a Western limit.
To set the limits, after memorizing the orbital positions select the (East or
West) limit to be set, using the V+/V- buttons.
Go up to the “Movement” option and using the V+/V- buttons, move the
dish to set the limit.
Return to the option “Limit Setup”, select the other limit and proceed as
above.
The option “Disable Limit” disables the use of limits. If limits are not
used, you run the risk of physical damage to the motor or the aerial.
- Recalculattion (Advance mode)
This reorganizes all positions after including new ones or eliminating
existing ones.
- Go to Reference (Advance mode)
This points the aerial Southwards (0º).
10.5.- DiSEqC 1.2/USALS Positioner