7
MCU Upgrade
For updating the device's chip software.
Only as instructed by qualified personnel.
CD Upgrade
For updating the software of the CD drive.
Only as instructed by qualified personnel.
Firmware Upgrade
For updating the firmware of the device.
Only as instructed by qualified personnel.
System Reset
Resets the device to the factory settings.
STREAMING
Please first connect the included WiFi antenna to the NP3 or connect the NP3 to your LAN via Ethernet port.
Connect the device to the Internet as described in the chapter “Menu” - “Network Wizard”.
Android and iOS users:
Download the following app:
Wiim Home
When starting the app, all compatible devices are searched for and displayed. Please select your NP3 here. In
the app, you can display the streaming services you want and use them to log in with your individual account
details.
Radio (DAB + / FM)
Please first connect the enclosed wire antenna to the NP3.
When you select DAB or FM for the first time, the device automatically searches for stations and automatically
assigns a preset to the first 40 stations found. With the forward button on the remote control, you can switch
between these 40 stations stored in presets and all other existing stations and, if you wish, assign them to one of
the 40 presets.
If you want to assign a station to a different preset, select the desired station and press the MEM button. Then
you can assign the station to the respective preset by pressing the desired number in the numeric keypad.
Note:
If you assign a new preset to a station, the station previously saved under this preset will be overwritten.
7