System diagram
Quick setup
1) Plug in the EtherWave-WEB using the supplied injector and power adapter.
2) Connect an Ethernet cable from each EtherWave-WEB to a network device.
3) Send Ethernet traffic. For troubleshooting, see Page 4.
Each EtherWave-WEB radio automatically selects the best radio channel, encrypts the Ethernet traffic, and transports the data wirelessly to its mate.
Any Ethernet device can be connected to the EtherWave-WEB. The EtherWave-WEB functions in place of an Ethernet cable and provides a trans-
parent wireless point-to-point Ethernet cable replacement.
Crossover cables are not necessary
as the EtherWave-WEB automatically senses the
device (client or switch).
900 MHz
digital
Ethernet
bridge
User’s Manual
etherWave-WeB
PaGe 3
www.ioselect.com
Phone
:: (877) 343.8467
RF connector
RP-TNC
(to antenna)
CAT5 cable
(not included)
Power over
Ethernet injector
Power adapter
110 VAC
Power
9 to 48 VDC
Data
Ethernet
RJ45/10BaseT
(to Network)
CAT5 cable
(not included)
Remote Side
(Same)
Local Side
