iOptron Corporation, 6E Gill Street, Woburn, MA 01801
www.iOptron.com
Charge the battery in full before storage
2. Battery Use
Retreat the CW locking screw a little. Slide the PowerWeight
TM
battery pack onto your
mount’s counterweight shaft. Tighten the CW locking screw.
Connect the battery 12V DC output to your mount using the supplied power cable.
3. Battery Install
For a mount with a 28mm counterweight shaft, such as CEM60, iEQ45 Pro or iEQ45 mount,
remove the CW Locking Screw. Hold both end of the inner sleeve and turn it counter
clockwise. The inner sleeve will be separated to two parts.
Reinstall the CW Locking Screw and slide the battery pack onto the mount CW shaft.
Tighten the CW Locking Screw.
CW Locking Screw
2X Power Outlet/
Charge Input
Power Cable
20mm Sleeve
