iOptron C70A Series, Инструкция по эксплуатации

Страница: 41 / 64

41
(3) An ASCOM Telescope Chooser window will occur, if the mount is ASCOM supported and
connected to the computer. Select correct mount ASCOM driver from the pull-down menu and
click OK.
(4) Click OK to complete the location setting.
Step 5. Calibration the Camera
The calibration process will tell the software if the iPolar is aligned to the mount RA axle after
installation. Calibration is only needed when:
(1) First time use iPolar;
(2) iPolar is adjusted (removed, rotated, etc); or
(3) You are suspect that the alignment is off.
NOTE: You may need to click on Clear Center of Camera in order to perform a new calibration.
The camera center of the iPolar/RA axis can be determined with two individual positions that separated
by 45 degree or larger.
Start the RA axis of the mount from first position, click on Confirm Position 1 . Rotate the RA axis more
that 45 degree and click on Confirm Position 2 . The position can start from any position. Show here is
only an example.