7
[email protected] | www.ionodes.com
5
ATOMAS-DUO-HDMI Carrier Board
5.1
Board layout
Figure 1 - ATOMAS-DUO-HDMI Carrier Board Top Side
Note:
On the top side of the ATOMAS-DUO-HDMI Carrier Board there is a small physical button
labelled “SW1”, located next to the J3 connector. This button allows the user to perform a reset
to factory default settings. In order to do that the user must press and hold the button until the
status LED on the board changes to an alternating Red/Green pattern. Once it is released the
board will load default settings and restart automatically. A short press of the button (without
waiting for the Red/Green pattern) will only restart the board.
