ionmax ION90, Руководство пользователя

Страница: 9 / 16

SLEEP MODE
When set to SLEEP , the IONMAX Humidifier ION90 LCD becomes dimmer with the relative humidity
set at 60%. It will operate continuously for 8 hours with WARM on before powering off automatically.
WATER SHORTAGE INDICATOR
The IONMAX Humidifier ION90 comes with an inbuilt water shortage sensor that will inform you when
the water level is low. The unit will beep 5 times and the will blink continuously to alert you of the
status. This is useful in reminding the user to refill the Water Tank .
DEMINERALIZATION FILTER
When water goes through the Demineralization Filter, it is restructured at an ionic level and the dissolved
mineral salts and other additives are removed, thereby softening the water. This aids in reducing mineral
buildup at the nebulizer and finer ultrasonic humidification.
USING THE IONMAX HUMIDIFIER
Ensure that the power cord is removed from the power supply at all times during installation,
refilling of water, maintenance and transportation.
OPERATING NOTICE
Remove the unit from all packaging. Check and ensure
that there are no foreign objects inside the Water Tank and
Water Reservoir
.
Remove the Water Tank from the base and fill it with clean,
tepid or cool water from the tap. NOTE: DO NOT use water
above 40°C.
Empty water from base.
Fasten the cap of the Water Tank snugly and place it back
onto the Humidifier Base . Please note that whenever a
filled
Water Tank
is placed onto the
Humidifier Base
, the
sound of gurgling water is normal. This happens when water
is travelling from the Water Tank into the Water Reservoir .
Wait for a while for the water to fill up the Water Reservoir .
Step 1:
Step 2:
Step 3:
Step 4:
7