Solar Diagram
LITHIONICS BATTERY, CLEARWATER, FL 33765 USA | PH: 727.726.4204 | FAX: 727.797.8046 | WEB: LITHIONICSBATTERY.com
10
The Victron Smart MPPT solar charge controller uses maximum power point
tracking which optimizes the match between the solar array and the battery bank.
It converts the higher voltage DC output from the solar panels down to the lower
voltage needed to charge the batteries. The PV solar array is connected to the
MPPT charger with a circuit breaker (not supplied). The specified circuit breaker is
only rated at 48VDC; if your PV solar array has an open circuit voltage that is
higher, then another circuit breaker with a higher voltage rating must be
substituted. The charger is connected to the positive distribution bus via a 40A
fuse. The fuse and wire sizes are based on the Victron MPPT 100/30 charge
controller, if a larger controller is used then the fuse and wire sizes should be
increased as required. Using the VictronConnect App on your smartphone you
can connect via Bluetooth and remotely control and monitor the Smart solar MPPT
charger.