5
6
Before using the rice cooker for the first time, wash the cooking pot and lid with warm
soapy water. Rinse and dry thorouhly.
To ensure that the rice is cooked evenly, make sure rice is evenly distributed in the pot and
not piled up on one side.
COVER THE OUTER LID
When covering the outer lid, turn the cover until it is properly tightened. If cover is not
securely tightened, it will affect the cooking.
5.
CONNECT THE POWER CORD AND START COOKING
Plug into a 220-240V~ power mains supply wall outlet.
Power on.
6.
TURN ON THE SWITCH TO COOK RICE
Depress the cook button on the Rice Cooker. The heating power indicator neon light
will glow. The cooking cycle will commence and will continue until the rice is fully
cooked. The cooking cycle will be completed when all the water has evaporated.
When more water is used, the cooking time will be longer.
7.
OPEN THE LID & STIR THE RICE
After the rice is cooked, open the lid and loosen the rice well regardless of whether is
rice is to be served immediately or later.
8.
ALLOWING THE RICE TO SETTLE
It is best to allow the rice to settle and absorb moisture for 10 minutes before serving.
9.
BROWN RICE
Brown rice can be cooked following the same instructions as above for white rice,
except that slightly more water is needed and cooking time is a little longer.
10.
IMPORTANT NOTE
A. When your rice cooker is new, you may notice some slight smoking or odor when in use
for the first time. This is normal with most heating appliances. It will not recur after the first
use. This does not affect the safety of your appliance, nor the quality of the rice.
B. Do not keep small amount of rice in the cooker for extended period of time, the rice will
become drier.
AFTER EACH USE
1. Remove plug from wall socket and allow unit to cool.
2. Wash aluminium pot and glass cover with warm soapy water.
3. Do not immerse main body in water.
4. Clean main body with a soft damp cloth.
6. Assemble back for next use.
Symptoms
Cause
Troubleshooting
Power
indicator
does not
lights
Heating
plate is not
hot
Heating
plate is hot
Not connected to power
Check to see if the power plug is well
connected to the wall socket
The indicator light may be
damaged
Send to authorized service centre for
repairs.
Power
indicator
lights
Heating
plate is not
hot
Heating element may be
damaged
Send to authorized service centre for
repairs.
Rice is not cooked or
the cooking time is too
long
The pot may be
deformed
The heating plate may
be deformed
The cooking pot may be
slanted.
There may be food
particles between the
pot and the heating
plate
1.
2.
3.
4.
Adjust the pot to ensure full contact
with the heating plate.
Replace with a new cooking pot
Rotate the pot slightly to ensure full
contact
Clear off all food particles from the
heating plate or the pot bottom
1.
2.
3.
4.
使用方法 How to use
故障排除 Troubleshooting
清洗方法 Care & Cleaning
