ARA DOCK4 User Manual V1.0
P
ion
eering Gas Sensing Technology.
Page 13 of 15
ionscience.com
Equipment maintenance and service
Disconnect power and turn-off the ARA DOCK4 before performing maintenance or cleaning.
To avoid personal injury or damage to the module, use only replacement parts and/or accessories
obtained from ION Science. No user-serviceable parts are inside the ARA DOCK4.
Warning
No user-serviceable parts inside
1)
If the equipment is damaged or parts are missing, contact ION Science immediately.
2)
Substitution of components may impair the safety of the equipment.
3)
Do not attempt to disassemble, adjust, or service the equipment unless instructions are
provided to perform a procedure, or a component is listed as a user-replaceable
component in the user manual.
4)
Use only replacement components provided by ION Science.
5)
Do not expose the equipment to electrical shock or severe and/or continuous mechanical
shock.
To maintain the base station in good operating condition, perform the following basic maintenance
as required.
-
To ensure quality product operation, maintain a log of all maintenance that is performed.
-
Clean the exterior with a soft, damp cloth. Do not use solvents, soaps, or polishes.
-
Adequate clearance for the power cord, cables and tubing.
-
Adequate clearance for normal use, maintenance and cleaning.
