5
Troubleshooting
If you experience any difficulties, please refer to the troubleshooting steps below as well
as those in the EZ Vinyl/Tape Converter manual included with this product.
If you are recording to a
computer
:
o
Make sure that PURE LP is powered on and that the needle is on the record.
o
Make PURE LP is selected as your computer's default recording device (see the instructions below).
o
If you are listening through your computer's speakers, make sure those speakers are selected as your
computer's default playback device (see the instructions below). Alternatively, you could connect PURE
LP's RCA outputs to a stereo system or powered speakers. Do
not
connect them to phono-level inputs;
PURE LP's RCA outputs are line-level and could damage a device with phono-level inputs.
(
Note:
The RCA outputs monitor the signal coming out of the turntable, not the signal coming from your
computer.)
o
Disconnect then reconnect the USB cable connecting PURE LP to your computer.
I'm not hearing any audio when playing music:
•
If you are playing music from
vinyl
:
o
Make sure that PURE LP is powered on and that the needle is on the record.
o
Connect PURE LP's RCA outputs to a stereo system or powered speakers. (Do
not
connect them to
phono-level inputs; PURE LP's RCA outputs are line-level and could damage a device with phono-level
inputs.)
•
If you are playing music from your
computer
:
o
Make sure your software music player's volume is turned up.
o
Make sure your computer's volume is turned up.
o
Make sure your computer's speakers are selected as your computer's default playback device (see the
instructions below). (PURE LP cannot be used as a playback device for your computer's audio.)
I am hearing a Hum through my speaker or laptop when using the turntable:
•
If you are recording to a laptop:
o
Please connect the laptop to a grounded power supply (3 prong)
•
If you are playing through a speaker:
o
Please connect to a grounded (3 prong) power supply.
My record is not playing at the correct speed; its pitch is too high or too low:
o
Ensure the 33 / 45 / 78 switch is set to the correct speed for your record.
o
If the 33 / 45 / 78 switch is set correctly and the speed it still slightly off, do the following:
1. On the underside of PURE LP, find the rubber pad with the RPM speed you want to adjust, and
gently lift up the rubber pad to remove it.
2. Push through the rubber seal, and tighten/loosen the screw using a Phillips-head screwdriver to
fine-tune the RPM speed.
Setting Your Computer's Soundcard as the Default Playback Device
•
Windows XP:
Click
Start Menu
Control Panel
(or Settings Control Panel in Classic View)
Sound and
Audio Devices
. Click the
Audio
tab and under
Sound playback
, select your computer's soundcard as the
default device.
•
Windows Vista:
Click
Start Menu
Control Panel
(or Settings Control Panel in Classic View)
Hardware
and Sound
Sound
. Click the
Playback
tab and select your computer's soundcard as the default device.
•
Windows 7:
Click
Start Menu
Control Panel
Sound
. Click the
Playback
tab and select your computer's
soundcard as the default device.
•
Mac:
Click the upper-left "apple" icon then click
System Preferences
Sound
. Click the
Output
tab. From the
menu, select
Internal Speakers
if you are using the computer's internal speakers or select
Headphones
if you
are using speakers or headphones attached to the computer's 1/8" headphone output.
Setting PURE LP as the Default Recording Device
•
Windows XP:
Click
Start Menu
Control Panel
(or Settings Control Panel in Classic View)
Sound and
Audio Devices
. Click the
Audio
tab and under
Sound recording
, select PURE LP as the default device.
•
Windows Vista:
Click
Start Menu
Control Panel
(or Settings Control Panel in Classic View)
Hardware
and Sound
Sound
. Click the
Recording
tab and select PURE LP as the default device.
•
Windows 7:
Click
Start Menu
Control Panel
Sound
. Click the
Recording
tab and select PURE LP as the
default device.
•
Mac:
Click the upper-left "apple" icon then click
System Preferences
Sound
. Click the
Input
tab. From the
menu, select PURE LP as the device.
BEFORE RETURNING THE PRODUCT, please contact ION Audio or your retailer for
technical support. Contact information can be found in the Safety Instruction Booklet
included with this product.
www.ionaudio.com
