ION IED05, Руководство пользователя программного обеспечения

Страница: 6 / 63

5
GAME
1. SEARCH – Press this button to tell the application to connect to the iDM05 module.
2. MIDI IN – If the module has been successfully connected, you will see “iDM05 MODULE” displayed here. If the module has
not yet been connected, you will see “CONNECT MODULE”.
3. RECOVER
4. SONG – Press this button to load one of the included songs. Please note that only the included songs can be used for
playing the game.
5. COLLECTION – Press this button to load a collection of songs into the game. You can either load one of the included
collections, or create a collection of your own by going to MP3 BANK on the main software interface.
6. PLAY – Press this button to play the loaded song or collection.
7. STOP – Press this button to stop playback.
8. PREV – Press this button to go to the previous song, if a collection has been loaded.
9. NEXT – Press this button to go to the next song, if a collection has been loaded.
10. MUSIC VOLUME – Use these up and down arrows to adjust the volume of the music, relative to the volume of the drums.
11. VISUAL CUES – These descending lines represent the drum hits you have to play and correspond to the drum sounds
pictured below.
12. TARGET MARK – To score points, hit the drum corresponding to the visual cue when the visual cue reaches this yellow
line. If you strike the corresponding drum pad while its cue is in the target mark, you will be awarded points.
13. PLAY MODE – Press this button to toggle between two different modes: “Player” or “Auto”. In “Player” mode, the
supporting drum parts will be muted and you can strike the pads when the visual cues reach the target mark to score points.
In “Auto” mode, the supporting drum parts will sound when the visual cues hit the target mark; this lets you hear the entire
drum part you have to play. Please note that while in “Auto” mode you will not be awarded any points when you strike the
pads.