4
Features
Top Panel
1.
Platter:
Place your record here.
2.
45 RPM Adapter Holder:
Holds the
included 45 RPM adapter. When not using
the adapter, please place it in this holder.
3.
Tonearm:
The fixed tonearm can be raised
and lowered by hand, or by pressing the
raise / lower lever.
4.
Arm Clip:
This specially designed arm clip
secures the tonearm while at rest or when
not in use. The arm clip has been designed
to remain in the up position while
unlocked.
5.
Raise / Lower Lever:
Raises and lowers
the tonearm.
6.
33 / 45 / 78 Switch:
This switch controls
the speed of the turntable platter.
Note:
For best results when playing 78
RPM vinyl records, use a 78 stylus (sold
separately). Only use a 78 stylus with 78
RPM vinyl records. Purchase a 78 RPM
stylus at
ionaudio.com
.
7.
Autostop Switch:
This switch turns autostop on or off. When autostop is on, the platter will
start spinning when the tonearm is placed over the record and stop spinning when the record
has reached the end. When Autostop is off, the platter will always spin regardless of the
position of the tonearm.
Note:
If your vinyl record stops before it reaches the end of the music, turn Autostop to the off
position for this particular record. This is generally recommended for 45 RPM records.
IMPORTANT:
Remove the plastic cartridge
cover (needle cover) before operating the
turntable.
*WARNING:
The RCA outputs are LINE level.
Please only connect these to LINE level inputs.
You may damage your receiver if you plug in a
LINE level device into a PHONO level input.
1
2
3
4
5
6
7
