Iomega px4-400d Скачать руководство пользователя страница 166 | Manualshive

Страница: 166 / 168

background image

European Union - Compliance to the Electromagnetic Compatibility Directive

This product is in conformity with the protection requirements of EU Council Directive 2004/108/EC on the
approximation of the laws of the Member States relating to electromagnetic compatibility. Lenovo cannot
accept responsibility for any failure to satisfy the protection requirements resulting from a non-
recommended modification of the product, including the installation of option cards from other
manufacturers.

This product has been tested and found to comply with the limits for Class B Information Technology
Equipment according to European Standard EN 55022. The limits for Class B equipment were derived for
typical residential environments to provide reasonable protection against interference with licensed
communication devices.

The Declaration of Conformity is available at

www.lenovo.com/social_responsibility/us/en/ec_doc_

Important WEEE Information

The WEEE marking on Lenovo products applies to countries with WEEE and e-waste regulations (for
example, European Directive 2002/96/EC, India E-Waste Management & Handling Rules, 2011) .
Appliances are labeled in accordance with local regulations concerning waste electrical and electronic
equipment (WEEE). These regulations determine the framework for the return and recycling of used
appliances as applicable within each geography . This label is applied to various products to indicate that
the product is not to be thrown away, but rather put in the established collective systems for reclaiming
these end of life products.

Users of electrical and electronic equipment (EEE) with the WEEE marking must not dispose of end of life
EEE as unsorted municipal waste, but use the collection framework available to them for the return,
recycle, and recovery of WEEE and to minimize any potential effects of EEE on the environment and
human health due to the presence of hazardous substances. For additional WEEE information go to:

www.lenovo.com/social_responsibility/us/en/product_recycling_program.html

European Union RoHS

Lenovo products sold in the European Union, on or after 3 January 2013 meet the requirements of Directive
2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic
equipment (“RoHS recast” or “RoHS 2”).

For more information about Lenovo progress on RoHS, go to:

www.lenovo.com/social_responsibility/us/en/RoHS_Communication.pdf

India RoHS

RoHS compliant as per E-Waste (Management & Handling) Rules, 2011.

Legal

Regulatory Information

156

«
...
164
165
166
167
168
»

Содержание px4-400d









































































































































































Отзывы:

Нет отзывов

Похожие инструкции для px4-400d

Бренд: D-Link Страницы: 10

Бренд: D-Link Страницы: 32

Бренд: D-Link Страницы: 6

Бренд: D-Link Страницы: 221

Express Ethernetwork DI-707P

Бренд: D-Link Страницы: 14

Бренд: D-Link Страницы: 2

Бренд: Accelerated Страницы: 10

Бренд: Accelerated Страницы: 4

Бренд: B+B SmartWorx Страницы: 4

Бренд: Garland Страницы: 4

Бренд: Keithley Страницы: 59

Бренд: SeaLevel Страницы: 17

HHM Series HHM2411

Бренд: TDK Страницы: 2

Бренд: Tandy Страницы: 24

Бренд: AMX Страницы: 1

Бренд: Alula Страницы: 4

Бренд: ICOP Technology Страницы: 34

Ethernet MCA 10/100 Adapter

Бренд: Olicom Страницы: 88

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды