14140 NE 200th St.
Woodinville, WA. 98072
(425) 398-8282
Connect all wires to new main
logic board.
Caution:
It is VERY important to
make a proper connection. If a row
of pins is missed or the cable is not
plugged in correctly, you can do per-
manent damage to the main board.
Make sure the ribbon cables lay
nicely and tighten the tyrap hold-
ing the ribbon cable but not so
tight as to damage the cable.
Install the bottom cover and then
rotate machine back to normal
operating position. Make sure to
install screws that hold the ma-
chine on the stand legs.
Follow the procedure for ‘Motion
Adjustment’ on Page 52 in the
Ioline FJ Printer and StudioJet Ser-
vice Manual. The Service manual
is available from the Ioline FlexJet
website. Contact Ioline Tech Sup-
port for login information.
If problems arise, contact Ioline
Tech Support.
