14.
Gently rotate the machine back to its normal resting position; be very careful notto drop the machine.
15.
Refasten stand-mounting screws.
16.
The procedure is now complete.
Страница 1: ...hat fasten the plotter head to the stand Fig 1 3 Position 2 people at each end of the machine 4 Have each person grab the end plate near the mounting screw which you just removed 5 Carefully lift from the bottom and rotate the plotter head towards the front The machine should rest forward while on the stand Fig 1 DO NOT LIFT THE MACHINE FROM THE REAR BY THE SILVER BAR THIS WILL CAUSE THE BAR TO BE...
Страница 2: ...em back in 8 Loosen the screws from left to right as you are behind the machine 9 Loosen one at a time until the gritshaft is loose on the right side 10 Now try rotating the shaft as we did previously and have your assistant try to pull the paper out from under the shaft 11 Once the paper is removed from under the gritshaft tighten the bearing tension screws to the point where you marked the screw...
Страница 3: ...14 Gently rotate the machine back to its normal resting position be very careful not to drop the machine 15 Refasten stand mounting screws 16 The procedure is now complete ...
