31
VICTOREM
2KSDI-Mini User's Manual
6.10 Sync View
The Sync/Misc control view is shown in Figure 18.
The Victorem 2KSDI-Mini has a sync input on the back of the camera supporting tri-level sync signals.
Uset the radio button to enable tri-level sync.
Possible status indications are listed in .
Status
Description
Line Lock
The camera's internal clock is being generated based on
the sync input (if connected) or past sync input (if
disconnected or changed).
Frame Lock
The camera output is synchronized to the sync input.
Match
The signal on the sync input matches the camera format.
Detect
A signal is detected on the sync input.
When sync is enabled but there is not a valid signal on the sync input, the camera status LED will flash
red. When the camera is locking to the sync input, the LED will flash green. When the camera is
locked on to the sync signal the LED will stop flashing and remain green.
IO Industries Inc.
Revision 3.0
Figure 18. Sync view
