NAU-202 Quick Start Guide
Rev. 1.0
3/3
Step 6.
Click “Access via Web" to access the web
administration.
Step 7.
a.
When the login window pops up, enter the
username and password. The default
username and password are “admin” and “root”
respectively. Click “OK”.
Do the following steps once you log in:
Click “System” in the dropdown menu
“Administration” on the left.
Adjust the date that corresponds to your
local date.
Select the time zone that corresponds to
your region from the dropdown list “time
zone”.
Adjust the time that corresponds to your
local time. Click “Apply”.
Step 8.
Click “LAN” in the dropdown menu on
the left.
In the “LAN Setting” window, enter IP
address, subnet mask, gateway, and
DNS.
Click “Apply”.
Step 9.
Connect USB HDD to any USB PORT on NAU-202.
The capacity of HDD must be more than 1GB and
formatted to Linux HDD or FAT32 HDD via NAU-202.
Click “Hard Disk Utility” under the dropdown menu
“Tools” on the left.
Note1: Windows System cannot recognize a hard
drive in Linux format if formatted via
NAU-202.
Note2: Windows System can recognize a hard drive
in FAT32 format if formatted via NAU-202.
However, each file size cannot exceed 4GB
due to the limitation of FAT32.
