NAU-202 Quick Start Guide
Rev. 1.0
1/3
Overview
Front View
1. Eject USB port 1 Button
2. USB 2.0 host port (USB1)
3. USB device access LED
4. USB 2.0 host port (USB2)
5. Eject USB port 2 Button
Back View
6. 10/100 RJ-45 Ethernet port
7. Restore Button
8. Reset Button
9. DC Power input (5V/2A)
Top View
10. Copy USB Button
11. LAN Access LED
12. System Status LED
13. Power LED
14. Firmware upgrade LED
Connectors
USB1:
USB 2.0 host port 1
Connect to your USB device 1
USB2:
USB 2.0 host port 2
Connect to your USB device 2
LAN:
10/100 RJ-45 Ethernet port
Connect the port with CAT5 cable (10/100 base-T) to
your switching HUB or Router
DC Power Input:
DC 5V/2A
Connect to power adaptor.
Buttons
EJECT1:
Eject USB port 1 Button
Press until USB1 LED is off. Then safely remove
the USB1 device.
EJECT2:
Eject USB port 2 Button
Press until USB2 LED is off. Then safely remove
the USB2 device.
RESET:
Reset Button
Press to reset NAU-202.
RESTORE:
Restore Button
Restore all configurations to factory default settings.
COPY:
Copy USB Button
Copy button: Copy all USB HDD files to “PUBLIC
folder of system HDD (Format via NAU-202)
LEDs
USB1:
USB1 device access LED
On: Connected
Off: Disconnected
Blinking: Data Access
USB2:
USB2 device access LED
On: Connected
Off: Disconnected
Blinking: Data Access
SYSTEM:
System Status LED
On: Ready
Blinking: Initializing
Off: Not ready or faulty
POWER:
Power LED
On: Power on
Off: Power off
LAN:
LAN Access LED
On: Connected
Off: Disconnected
Blinking: Data Access
FIRMWARE:
Firmware upgrade LED
Blinking: Upgrading firmware
System Requirements
1.
Windows, Mac or Linux operation
system
2. Ethernet
Adapter
3.
Cat5 network cable with RJ-45
connector.
4. TCP/IP
protocol
5.
ADSL/Cable modem and user account
of ISP (Internet Services Provider).
6.
USB Device (USB Hard Disk or USB
Flash Disk).
7.
Router or Switching HUB
