Invoke HSM, then press [F5]
USB Reset
Invoke HSM, then press [b]
Toggle hotkey beepers on or off
Invoke HSM, then press [x] [Enter] Disable or enable port switching hotkey
Invoke HSM, then press [u] [p] [g]
[r] [a] [d] [e] [Enter]
Activate Firmware Upgrade Mode – Front panel KVM LED will flash
indicating Firmware Upgrade Mode is activated.
Invoke HSM, then press [r] [Enter]
Restore default KVM settings
Invoke HSM, then press [d]
Capture and store video information on specific port
Invoke HSM, then press [m]
Enable or disable mouse emulation
Invoke HSM, then press [F1]
Reset keyboard and mouse under some special OS’ that do not
support USB 2.0
Invoke HSM, then press [n]
Toggles keyboard emulation on/off (default is on)
Invoke HSM, then press [w]
Toggles mouse port switching on/off. To use this function, mouse
emulation must be enabled
Invoke HSM, then press [c]
Changes front panel push buttons to a hotkey of your choice
(GCS1644 only)
*Note: To exit HSM manually, press Esc or spacebar
23
