Compliance Information
Items
Specifi cation
Power supply
Voltage/Current
Transmitter: DC5V/1A Receiver: DC5V/2A
Power consumption
TX < 3W Rx < 5W
HDMI
performance
and interface
HDMI compliance
HDMI 1.3
HDCP compliance
HDCP 1.2
HDMI resolution supported
480i@60Hz, 480p@60Hz, 576i@50Hz,
576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz,
1080p@50/60Hz
Supports audio formats
L/R stereo audio
Maximum transfer rate
10.2Gbps
Input and output TMDS signal
0.7 ~ 1.5Vp-p (TMDS)
Input and output DDC signal
5Vp-p (TTL)
Input cable length supported
≤ 5m (AWG26 HDMI 1.3 cable standard)
Output cable length supported
≤ 5m (AWG26 HDMI 1.3 cable standard)
Wireless
performance
and interface
Transmission method
5.8G Wireless transmission
Transmission distance
100 Feet (30.48 Meters)
Latency
≤ 200 ms
Protection level Electrostatic protection of the whole
machine
1a Contact discharge level 3
1b Air discharge level 3
Standard: IEC61000-4-2
Operating
environment
Working temperature
0 ~ 40°C (32 ~ 122 °F)
Storage temperature
-20 ~ 70°C (-4 ~ 158 °F)
Humidity (no condensation)
0 ~ 90%
Body properties
Dimension
TX: 3.5 (W) x 1.54 (D) x 0.59 (H) in
RX: 5.18 (W) x 3.74 (D) x 0.78 (H) in
Material
Plastic
Finishing
Grit blast
Colour
Black
Weight
TX: 0.06lb, RX: 0.48lb
Reliability
Mean time between failures (MTBF)
>30000 Hours
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital service, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. Any changes or modifications made to this equipment may void the
user’s authority to operate this equipment. This equipment generates, uses, and
can radiate radio frequency energy. If not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
FCC Caution:
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
