Stud mounting is recommended. Use proper hardware for your wall type (such as anchors for drywall). When
in doubt, consult your local hardware store. Please use caution and wear proper protection for your safety.
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son
fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce
dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.
===========================================================================================
IMPORTANT NOTE: (IC: 9078A-ZRF31200)
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the radiator & your body.
NOTE IMPORTANTE: (IC: 9078A-ZRF31200)
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet
équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
Caution:
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to
co-channel mobile satellite systems;
(ii) high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and
that these radars could cause interference and/or damage to LE-LAN devices.
(i) es dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de
réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;
(ii) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs
principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient
causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
EDID (Extended Display Identification Data) is the data provided
by digital displays to indicate their capabilities to video sources.
The Wireless 3D Digital Kit distributes HDMI signals from your
video source to two HDMI displays. In order to deliver the best
audio and video formats supported by both TVs, the kit reads
the EDID information from both displays and determines the
“Best Common” video resolutions and audio format to send to
the video source to program EDID on the device (i.e. Blu-ray
player’s auto resolution setting)
In order to output the best common resolution, the kit reads the
EDID whenever a TV is plugged in, unplugged, or turned on/off.
You will see both TVs flash couple seconds in order to adjust the
“Best Common” resolution that all devices can handle.
To get the best resolution for a specific TV (i.e. 1080p 3D), you
can manually change the resolution from your video source or
unplug the lower EDID devices then power cycle the kit and
devices. For certain 3D Blu-ray players, you may need to eject
and insert the 3D Blu-ray disc. Since your video source is not
outputting the best common resolution, one of your TVs may not
show any content or play audio only. Please refer to your
devices’ user manuals for further instructions.
Display A
Display B
Loop-through TV: 1080p 3D
Remote TV: 720p
Best Common: 720p
Mounting the Receiver to the Wall
Industry Canada Statement
EDID Management
