Installation
3
ON/OFF
RESET
AA
AA
STEP 1
Connect the USB RF
receiver into any open
USB port of your
computer while the
computer is turned on.
STEP 3
Turn on the keyboard by switching
the
ON/OFF
switch to the
ON
position.
FINAL STEP
Now the keyboard and trackball should be working properly.
If the keyboard and trackball are not working, please see the
Pairing Section
.
*Note: Please make sure the batteries are
installed properly as the directions that
are indicated inside the battery tray
STEP 2
Open the battery cover on the back of
the keyboard and insert the 2 included
AA batteries into the battery
tray.* Then, close the battery
tray by putting the battery
cover back on.
ON/OFF
RESET
