IOGear GKB635W, Руководство пользователя

Страница: 4 / 6

Media Hokeys
Fn+F6

Previous Track , Fn+F7

Play/Pause , Fn+F8

Next Track , Fn+F9

Mute , Fn+F10

Volume Down,
Fn+F11

Volume Up , Fn+F12

Prt Sc , Fn+Del

Ins , Fn+Arrow keys

Home/End/PgUp/PgDn,
LED signal description
LED1

have Blue color and Red Color in keyboard
**Blue Color : it will be blinked when pairing mode process.
**Red Color : it will be blinked when low battery status?
RF2.4GHz Pairing Process
1. Press the ID bottom which is locate at keyboard backside button.
2. Then plug Nano dongle into your Notebook or PC USB slot.
One/Off Power Switch
On/Off slider switch which locate in back side of Keyboard unit, when the slider switch have turn on, the power will be
turned on. When you turn off the slider switch, the power will be off.
(** suggest you turn off the battery power for saving battery power consumption, if you don’t use this keyboard for long
time)
How to Operating:
Before you starting use this keyboard, please detail READ below operating information;
(Notice: Please use new AA battery for this keyboard or use the enclose batteries before you first time use GKB635W
keyboard unit.)
Connect to Bluetooth host devices;
1.Take out GKB635W keyboard unit from package box
2.Open PE bag of keyboard then load the AA alkaline battery.
3.Turn On switch button to “on” status, it is mean power on status for keyboard.
4.Press ID button which is located keyboard backside, the keyboard blue LED will have blink means the keyboard have ready
forvpairing process. You can put Nano dongle into USB slot, then keyboard can be working well.
(if you don’t want to connect GKB635W, you can pull out Nano dongle)
Basic Troubleshooting
Q1 : You can’t pairing this keyboard
1.As power saving design concern, if you can’t connect keyboard with Nano dongle.
You can repeat the process as press ID button locate at keyboard backside, then put Nana dongle into devices USB slot.
2.if the keyboard have any battery power issue, may you can try to turn off power switch then turn on it again, or you could
replace any new AA alkaline battery then you can re ‐ pairing keyboard and Nano dongle.
3.Please make sure does battery power is fully enough for keyboard working, may you can check Red color LED, if the LED is
blink status during you typing any key, If so, the battery is not enough power, it need to replace a new one immediately.