EMC Information
Federal Communications Commission Statement (FCC)
Statement:
This equipment has been tested and found to comply with the limits
for a Class B digital service, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. Any changes or
modifications made to this equipment may void the user’s authority
to operate this equipment. This equipment generates, uses, and can
radiate radio frequency energy. If not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CE Statement
This device has been tested and found to comply with the
following European Union directives: Electromagnetic Capability
(2004/108/EC), Low Voltage (2006/95/EC) and
R&TTED (1999/5/EC).
Switch Operation
Switching between connected computer sources:
a. Manual – involves pressing the port selection pushbuttons
located on the GCS1942/GCS1944 front panel.
b. Hotkey – involves entering combinations from the keyboard (list
of complete Hotkey Settings is available in the manual, located
on our website).
c. Mouse – involves clicking the mouse wheel button twice to switch
between ports. Please make sure mouse and mouse wheel
button emulation is turned on. (list of complete Hotkey Settings is
available in the manual, located on our website)
For a list of complete Hotkey Settings, please visit our website for
updated manuals:
www.iogear.com/product/GCS1942
www.iogear.com/product/GCS1944
