3
Hardware Installation
EMC Information
FEDERAL COMMUNICATIONS COMMISSION STATEMENT:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
FCC Caution:
Any changes or modifications not expressly approved
by the party responsible for compliance could void the user’s authority
to operate this equipment.
Warning:
Operation of this equipment in a residential environment
could cause radio interference.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
CE Statement
This device has been tested and found to comply with the following
European Union directives: Electromagnetic Capability (2014/30/EU)
and Low Voltage (2006/95/EC).
WARNING:
This product may expose you to chemicals including
Cadmium which is known to the State of California to cause cancer,
birth defects or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov
Operation
Switch Operation
Switching between connected computer sources:
a. Manual – involves pressing the port selection pushbuttons
located on the GCS1932H/GCS1934H’s front panel.
b. Hotkey – involves entering combinations from the keyboard (list
of complete Hotkey Settings is available in the manual, located
on our website).
c. Mouse – involves clicking the mouse wheel button twice to switch
between ports. Please make sure mouse and mouse wheel
button emulation are turned ON (List of complete Hotkey Settings
is available in the manual, located on our website)
For a list of complete Hotkey Settings, please visit our website for
updated manuals:
www.iogear.com/product/GCS1932H
www.iogear.com/product/GCS1934H
This product carries a 3 Year Limited or Lifetime Warranty. For the
terms and conditions of this warranty, please go to
http://www.iogear.com/support/warranty
Register online at https://www.iogear.com/register
Important Product Information
Product Model
Serial Number
Limited Warranty
WE’RE HERE TO HELP YOU!
NEED ASSISTANCE SETTING UP THIS PRODUCT?
Make sure you:
1. Visit www.iogear.com for more product information
2. Visit www.iogear.com/support for live help and product support
IOGEAR
iogear.custhelp.com
www.iogear.com
Contact
© 2020 IOGEAR
HDD
HDD
GCS1932H Rear View
GCS1934H Rear View
GCS1932M Front View
GCS1934H Front View
4
GCS1932H
2-Port
4K
USB
HDMI
KVMP
1
3
1
2
1
1
1
1
1
3
1
2
1
8
1
6
1
9
1
9
1
7
1
7
1
7
1
7
1
8
1
6
1
7
1
7
8
8
1
5
8
8
1
5
