IOGear GCS1212TAA4, Руководство пользователя, Страница: 14 / 36

14
Overview
No. Component Description
1 Port Selection
Pushbuttons
Pressing a Port Selection Pushbutton brings together the Keyboard, Mouse, Video, Audio,
and CAC reader focus to the computer attached to the corresponding port
2 Port and CAC LEDs The Port/CAC LEDs located on front panel are to indicate Port/CAC reader selection or
connection status.
Port LEDs (Bottom row; Orange LEDs)
7
Online – Port LED lights dim orange to indicate that the computer attached to its
corresponding port is connected and powered on
7
Selected – Port LED lights bright orange to indicate that the computer attached to
its corresponding port has the KVM focus
Warning - Flashes to indicate that a non-qualified USB HID device is connected to console USB
keyboard port or mouse port when the corresponding port has the focus.
CAC LEDs (Upper row; Green LEDs, models with CAC function only)
7
Online – CAC LED lights dim green to indicate that the computer attached to its
corresponding port has a USB CAC reader cable connection up and running, and
the CAC function is enabled
7
Selected – CAC LED lights bright green to indicate that the CAC function is enabled
and the computer attached to its corresponding port has the CAC focus
7
None – No lights indicate that the cable is not connected or the CAC function has
been disabled
7
Warning – CAC LED Flashes to indicate that a non-qualified USB Smart Card/ CAC
reader is connected when the corresponding port has the focus
Note:
1.
CAC function of each port can be enabled or disabled by pressing the port selec -
tion pushbutton for more than 3 seconds (this is a toggle feature). Please refer to
the Operation section of this user manual for more information.
2.
All front panel LEDs (except for Power LED) will flash continuously when a chassis
intrusion or self-test failure (except for Pushbutton jam) is detected. See Chassis
Intrusion Detection section for further details
3.
Port and CAC LEDs also indicate the status of the Secure KVM self-test. See
Operation section for further details
3 Reset Button Press the Reset Button to reset IOGEAR Secure KVM Switch
Note:
1.
When the Reset Button is pressed for more than 5 seconds, the Keyboard/Mouse
buffer will be purged and KVM switch will reboot and perform a self-test. After a
successful self-test, port focus will be switched to Port 1, and CAC function of each
port will be set to factory default (enabled).
2.
If the Secure KVM fails to generate video on the monitor after a reset, please
power off the installation, check the cables, and follow the instructions in this
manual to power on the installation
4 Audio Ports Connect cables from your speakers to these audio ports
Note:
Only standard analog speaker connections are allowed. The use of analog microphones
or line-in audio devices is strictly prohibited
5
USB Smart Card/CAC
Reader Port (Models
with CAC function only)
Only qualified USB authentication devices (e.g., standard smart card and CAC reader) can
be connected to this port.
Note:
USB Authentication device filter is configurable by authorized administrators for
trusted authentication devices (e.g. USB token, USB Biometric reader). Please refer to
Administrator’s Guide
for details.
6 Num Lock LED Num Lock LED lights green to indicate that the Num Lock function has been turned on.
Note:
Num Lock LED on keyboard will be disabled due to security requirement
7 Caps Lock LED Caps Lock LED lights green to indicate that the Caps Lock function has been turned on
Note:
Caps Lock LED on keyboard will be disabled due to security requirement
8 Scroll Lock LED Scroll Lock LED lights green to indicate that the Scroll Lock function has been turned on.
Note:
Scroll Lock LED on keyboard will be disabled due to security requirement
9 Power LED Power LED lights green to indicate that the IOGEAR Secure KVM Switch is powered on