17
User Authentication Device Filtering Configuration
Administration functions enable authorized administrators to Configure Device Filtering (CDF). This function
allows the administrator to configure whether the Secure KVM Switch will accept or reject specific USB devices.
CAC Port device filtering can also be configured via IOGEAR Port Authentication Utility. Please refer to the
IOGEAR
Port Authentication Utility Guide
for details.
Reset KVM to Default
The Administrator function enables the authorized Administrator to reset the Secure KVM Switch configuration
to the factory default settings.
1.
When the administrator performs Reset KVM to Default, settings previously configured by the
administrator (such as USB device whitelist/backlist) will be cleared and reset to the factory default
settings.
2.
Once Reset KVM to Default has been completed, the Secure KVM Switch will terminate the
Administrator Logon mode, purge keyboard/mouse buffer, and power cycle the Secure KVM Switch
automatically. After a successful self-test, the KVM port focus will be switched to Port 1, and CAC
function of each port will be set to the factory default (enabled).
3.
Reset KVM to Default will not affect or erase Log data
4.
Reset KVM to Default will not affect previously changed Administrator password
5.
Reset KVM to Default will clear the whitelist/blacklist created by both the Secure KVM administrator
functions and IOGEAR
Port Authentication Utility
.
