2
RS232 SERIAL ADAPTER
GETTING TO KNOW YOUR RS232 SERIAL ADAPTER
1). RS232 Connector:
DTE - Connect to any DCE device (Master/such as a modem).
DCE - Connect to any DTE device (Slave/such as a PC).
2). Mode Button:
Push it to change operation between Configure/Data Mode and Reset function.
3). Apply power to Bluetooth RS232 Serial Adapter by using the power adapter
accompanied.
4). Set the slide switch position to right (toward 9-pin connector).
(Option: Set it to left position (away from 9-pin connector) features NO DC Power
Adapter is needed. A DC power must be applied to Bluetooth Adapter through pin-9 of
RS232 connector).
5). A one-to-one RS232 Extension Cable allows you to extend the connection if needed.
FUNCTION OF LED
POWER LED
Power LED turns on when POWER is applied to Bluetooth RS232 Serial Adapter.
BLUETOOTH LED
Bluetooth LED is flashing quickly when Bluetooth is paired and linked.
Bluetooth LED is blinking when there is data transmitted/received between two
paired and linked devices.
<Light flashing 1 second and continues with 1 second blackout repeatedly>
MODE LED
MODE LED is ON when RS232 Serial adapter is staying at Configuration mode.
MODE LED is OFF when RS232 Serial adapter is staying at normal DATA mode.
Slide Switch
DC Power Jack
Mode Button
Bluetooth LED
Mode LED
Power LED
