manualshive.com logo in svg

iO UT32, Руководство по установке, Страница: 5 / 52

Поделиться
Скачать
iO UT32 Скачать руководство пользователя страница 5

INTRODUCTION

The 

UT32

 is a feature-rich touchscreen thermostat that can be battery powered or hardwired to the 

HVAC equipment. Using a common sense approach to the installation will ensure this product is 

installed properly and to the customer’s satisfaction. Please take time to read and understand this 

manual so that installation and testing is performed in an efficient manner.

This manual is to be used in conjunction with the supplied User Manual.

Although great care has been taken in the preparation of this manual, iO 

HVAC Controls

 takes

 

no responsibility for errors or omissions contained herein. It is the responsibility of the

 

installer to ensure that this thermostat and the equipment connected to it operate in a safe and

 

efficient manner.

Due to ongoing product improvements, iO 

HVAC Controls

 reserves the right to change the

 

specifications of the 

UT32

 thermostat or its components without notice.

All rights reserved.

© iO 

HVAC Controls

, LLC 2016.

Intellectual rights apply.

4

Содержание UT32





















































Отзывы:

Нет отзывов