IO-Power Technology Co., Ltd
1F,No.100, Jinzhu Rd., North Dist., Hsinchu City 30055, Taiwan
http://www.io-power.com.cn
e-mail:
Tel: +886 3 5429395 Fax: +886 3 5357297
Form No.
：
IOP-OAPA-001-001
8
/
14
Retention date
：
6Years
The network-setting menu is mainly used to set WiFi wireless parameters, IP network
parameters and VOIP parameters. Please contact the system administrator to get the right
network parameters.
You must input the administrator's password to set parameters. The default password is 080921.
Please keep it in mind.
Note: You must re-boot your phone to make the new settings effective.
8.4.1. AP Configuration
You may set AP parameters from this menu.
SSID
This option is to set AP’s SSID. Input the network name (32 alphanumeric characters maximum),
and press the soft key on the left.
Set Security
This option is to set the safety parameters of WiFi wireless network. Select "open system", such
as WEP key, WPA-TKIP, WPA-AES or WPA2.
If WEP key is chosen, you shall set its menu.
If WPA encryption is chosen, you shall set the menus of WPA/WPA2.
WEP Key setting
If the safety mode of AP config file is WEP key, use this option to set WEP key. Please follow the
operations below to set:
Choose 64-bit or 128-bit based on the WEP key of WIFI wireless network, and then press the
soft key on the left.
For 64-bit, make sure the WEP key is comprised of 5 ASCII characters or 10 hexadecimal
characters.
For 128-bit, make sure the WEP key is comprised of 13 ASCII characters or 26 hexadecimal
characters.
Note: Settings of WEP key may be different, depending on the settings of WIFI wireless network.
If the WiFi wireless network only supports one fixed hexadecimal-character key, you shall input
the same WEP key as the phone’s.
If the WiFi wireless network supports both ASCII and hexadecimal WEP keys, you may input
either ASCII or hexadecimal key.
WPA/WPA2 Key Setting
