IO-Power Technology Co., Ltd
1F,No.100, Jinzhu Rd., North Dist., Hsinchu City 30055, Taiwan
http:// w w w. io -p ow e r. c om
e-mail:
Tel:+886 3 5429395 Fax: +886 3 5357297
Form No.
：
IOP-OAPA-001-001
10
/
22
Retention date
：
6Years
B: Connect WLAN
1.
Set the SSID name WIFIAP first (the default name is the one you have just selected, the
name is consistent to AP currently), press left soft key or OK key to enter change menu.
Enter SSID
2.
Select Security Type> WEP-OPEN〉 WEP Key index〉 WEP Key 1, press left soft key or OK
key and enter the WEP-OPEN menu again. If the security type is “Open”, go to Step 3
directly.
Select Key / Pass〉Passphrase/ Hex Key, press left soft key or OK key enter the Enter key
（Hex）mode, key of the SSID is the one of the AP you have just selected., then press the left
soft key or OK key enter change menu again.
Enter passphrase Enter hex key
or
3.
Select IP setting> use DHCP (If the WLAN you selected support DHCP server), press left soft
key or OK key to enter change menu again.
You can also select static IP, follow the indications, and enter the IP address, net mask,
gateway, DNS address in turn. And back to change menu after setting.
4.
The functions of configuration item "Options" menu are as follows:
Use - use the configuration item
Change - set the configuration item
Rename - rename the configuration item
Search - search an AP for the configuration item
WPS - connect the configuration item in WPS
Reconnect - reconnect the AP under the configuration item
WIFIAP
WIFIAP
WIFIAP
