IO-Power Technology Co., Ltd
1F,No.100, Jinzhu Rd., North Dist., Hsinchu City 30055, Taiwan
勁電科技有限公司 台灣30055新竹市北區金竹路100號1 樓Tel:+886-3-5429395 Fax:+ 886-3-5357297
http://www.io-power.com.tw
http://
www.io-power.com.cn
e-mail:
Form No.：IOP-DOC-011-001 5 / 12 Retention Period：6Y
input current is 12VDC 6A~ while output current is 2.5A(Max), output voltage 24VAC.The output
24VAC-60W(Max) (Peek output power support 100W Max)。
Users operate this product under the construction of this manual, and under normal use.
IO-Power provides 1 year warranty for the Control Board.
Attention of the Product Use
Attention of the Product storage
High and low temperature storage
IOP-DAPI-12243A-2 must be stored at -40°C ~ 80°C to keep the safety and normal operation.
Attention of the product use
This product is DC to AC Power Inverter; users should pay attention to the following:
1.
In accordance with the product specification data for the use of this product, please do not
remove or change this equipment without authorization of any of the main parts, so as to avoid
the safe use of the extension of the problem.
2.
This product do not exceed 80°C heat and closer to the source of fire or less than -40°C to
direct low-temperature cooling, resulting in damage of electronic components and batteries.
3.
When the product casing when the temperature exceeds 70°C, do not carry out charging and
discharging operations to avoid danger.
4.
Do not place this product in high humidity and put into water or close to the highly volatile
chemical solvents to avoid danger.
5.
Installation and assembly connectors in accordance with product instructions, not adjacent to
the wrong wire connection to avoid the danger.
6.
Do not hammer or other items to the hammer strike, trample on the battery and cause strong
impact or throws, drops, heavy blow to this product to avoid danger.