Inxide XE01, Инструкция по эксплуатации

Страница: 3 / 9

FOR XE01 · XU01
EXERCISE MONITOR INSTRUCTIONS
ENGLISH
MODE
This key lets you to select and lock on to a particular function you want.
1. Without any signal coming in 4-5 minutes, the LCD display will be shut off
automatically.
2. When there is signal input, the monitor automatically turns on.
3. If there is a possibility to see an improper display on the monitor, please
replace the batteries to have a good result. You must be to replace the
batteries at the same time.
4. The monitor use 1.5V “AA” or “AAA” batteries.
2. KEY FUNCTIONS
NOTE
1. AUTO ON/OFF
•
This system turns on when any key is pressed or when it receives an signal
input from the speed sensor.
• The system turns off automatically when the sensor has no signal input
of no key are pressed for approximately 4 minutes.
2. RESET
The unit can be reset by either changing battery or pressing the mode key
for 3 seconds.
3. MODE
To choose SCAN or LOCK if you do not want the scan mode, press the MODE
key when the pointer on the function you want which begins blinking.
4. FUNCTIONS
• TIME:
Press the MODE key until pointer lock on to TIME. The total working
time will be shown when starting exercise.
• SPEED: Press the MODE key until pointer lock on to SPEED. Displays current
speed during workout time.
OPERATION PROCEDURES
1. SPECIFICATIONS
TIME . . . . . . . . . . . . 00:00~99:59 MIN
SPEED
. . . . . . . . . . . 0.0~99.9 KM/H (ML/H)
DISTANCE . . . . . . . . . . 0.00~999.9 KM (ML)
ODOMETER
. . . . . . . . . . 0.0~9999 KM or ML
PULSE . . . . . . . . . . . . . 40~240 BPM
CALORIES
. . . . . . . . . . . 0.0~9999 KCALS
• DISTANCE: Press the MODE key until pointer lock on to DISTANCE. The
distance of each workout will be displayed when starting exercise.
• ODOMETER: Press the MODE key until the pointer advances to ODO METER.
The total accumulated distance will be shown.
• CALORIE: Press the MODE key until pointer lock on to CALORIE. The calorie
burned will be displayed when starting exercise.
• PULSE: Press the MODE key until the pointer advance to PULSE function
and put ear-clip to ear or the hand take hold of the sensor about 3 seconds
show out.
• SCAN: Display changes according to the next diagram every 4 seconds.
Automatically display of the following functions in the order shown:
TIME-SPEED-DISTANCE CALORIE-PULSE