(Note: The Controller only comes with the 3-Pack.)
Switch on your PC after completing
installation.
Mode Switching:
M/B Mode
: The controller will automatically connect
to “M/B Mode” if your M/B supports ARGB lighting
effects. Now you can control your ARGB lighting effect
via M/B software.
Controller Mode
: If your M/B does not support a
3-pin, 5V ARGB header, the controller will switch to
“Controller Mode”, and you will able to switch the
lighting effect by clicking the button on the controller
or the PC reset button if you had connected the 2-Pin
reset button cable to the controller.
Tap the button to change the lighting modes.
1.
2.
1
Rainbow
9
Diagonal Transition
2
LED-Red
10
Rotating LED Trio
3
LED-Green
11
Full Circle
4
LED-Blue
12
Flow-Red
5
LED-Purple
13
Flow-Green
6
LED-White
14
Flow-Blue
7
Light at the end of
the Tunnel
15
Turn Off the Light
8
Two-Tone Ring
*
InWin reserves the right to change the lighting
modes.
