InWin IW-RJ448-05, Руководство пользователя, Страница: 32 / 57

29
Note:
4.3.3.1 Telnet
■
The Telnet service is enabled by default. It shares the same level of CLI
commands as it is through the serial console terminal.
Users can disable the Telnet support on web GUI or with CLI commands if
there are security concerns.
In CLI, in “mgmt.s” layer type “service telnet 0” to disable telnet service.
■
The difference compared with serial console is that Telnet sessions
require a Credential (Username and Password) to gain access to it.
Refer to the above session for the default credential information.
■
Below is a reference capture of a tenet session.
4.3.3.2 SSH
■
The SSH service is enabled by default. It provides the same level of CLI
commands as it is through serial console or Telnet session.
■
SSH provides a secure connection between host and the JBOD system. It
is enabled by default on most Linux OSes. There are some freeware SSH
tools for Windows such as Putty, Tera Term, …etc.
■
Below is the Tera Term example to establish the SSH session.
The factory default IP address is static address 192.168.100.1. If there is a DHCP server
in the IP network, users can simply change the IP address on web GUI or through serial
console.
In serial console, type
“dhcp 1” in “mgmt.s” layer to enable dynamic IP address for the
system. Type “save” so the setting is kept for the next system boot.