Installation
7.ARGB One-Click Controller Installation
Note: Please follow this step if your motherboard
does not support ARGB effect.
Please use the included ARGB One-Click Controller to
connect to your PSU’s SATA cable and the Addressable
Cable in order to use the 11 different of lighting effects.
ARGB Cable Header
ARGB One-Click Controller
SATA Power Input
Hold the button to turn on or off the lights. Tap the button to change the lighting modes.
*InWin reserves the right to change the lighting modes.
1
9
2
10
3
11
4
12
5
6
13
Rainbow
LED-Red Breathing
LED-Green
LED-Blue
LED-Purple
Diagonal Transition
Rotating LED Trio
Full Circle
Flow-Red
Flow-Green
LED-White
7
14
Flow-Blue
Light at the end of the Tunnel
8
Two-Tone Ring
