InWin 915, Руководство пользователя

Страница: 15 / 21

Please unscrew the thumbscrew under the top
cover. Pull out the top cover horizontally and lift
upwards to remove the cover.
9. Top Fan/ Liquid Cooling Radiator Installation
Parts Required: Water-cooling System Washers
Open the back panel by loosening the thumbscrews on the side.
Take out the fan bracket and install the fans/radiator. (Note* Be cautious of pressing or pulling any of the internal wires,
which may result in wire failures. Please run the wires smoothly before installing the top cover.)
1
2
4
5
6
7
3
10. Rear Fan/ Liquid Cooling Radiator Installation
Parts Required: Water-cooling System Washers
Open the back panel (refer to step 9) and install the fans/radiator.
For the convenience of installation, the 915 allows users to completely remove the front and back panel. To easily
remove the panels, please refer to step 9 to remove the top cover, and lift the panel upward off the hinge to completely
remove the front or back panel.
Installation Guide