InWater Tracker
User Manual
–
2021
12
1.250.850.0022 | [email protected] | INWATERTECH.COM
3.
Service and Maintenance
3.1.
Normal Periodic Use
After each measurement session:
1)
Remove the probe from the water and rinse it immediately
to prevent residue from drying on the membrane tubing.
2)
Slide off the protective tubing shield.
3)
Rinse off the membrane tubing with clean fresh water and
gently shake the probe dry.
4)
Allow up to 4 hours for the probe to dry out (*more time
might be required in cold damp environments).
5)
Store dry at room temperature.
6)
If the probe is being used frequently, it may help to have a
spare cartridge to swap in while the other cartridge is
drying out.
