inVue PL106, Быстрый старт

Страница: 3 / 9

Fully close panels. Insert correctly sized strike plate
behind front panel where lock will be positioned. Use
sizing tool (PL156) or strike plate selection guide below
to identify correct part.
Determine if the front panel is on the left or right hand
side.
Note: The illustrations in this booklet are for
right front panel orientation. For left front panel
cabinet install in opposite direction.
Wipe front and back of both panel surfaces with
alcohol wipe where you intend to mount the lock.
1 2
CONTEN
TS:
One p
ad satur
ated in
75%
Isopro
pyl Alc
oho
l
DIRECTIONS
:
Apply to
pically
as
needed to
cleanse
surface mount
ing area.
FOR EXTERN
AL USE
ONLY
KEEP OUT
OF REACH
OF
CHILDREN KEEP AW
AY FROM E
YES
AND FIRE
ALCOHOL
WIPE
(included)
STOP!
WAIT 5 MINUTES!
RIGHT
FRONT
PANEL
LEFT
FRONT
PANEL
STRIKE PLATE
PANEL
OVERLAP
Note: Strike Plate size is determined by width of panel overlap.
Strike Plate Selection Guide:
Panel Overlap Order Code
22 - 25 mm PL120-1
26 - 35 mm PL120-2
36 - 55 mm PL120-3
56 - 85 mm PL120-4
86 - 110 mm PL120-5
IMPORTANT! Allow alcohol to air dry for a
minimum of 5 minutes or dry alcohol with lint
free cloth before moving to step 2
.
A
B
4 5
Note: Align above
or below shelving.